Plain or Modular Barriers T 101 and T 102

 

The Sheets are made of polymethylmethacrylate (PMMA) and are available in plain (T 101) or modular (T 102) forms.  

 

Panels are 2000 mm wide and 12-15-20-25 mm thick, and can be produced in any desired length. They are applied in different shapes according to the carrier pole type.

 

Panels have 29 dB, 30 dB, 32 dB and 33 dB sound insulation index (DLR) values according to TS EN 1793-2 test results which are made in international accredited acoustical laboratories and at the same time according to the Turkish standard. This value falls within the class B3, which is the highest class according to Annex A classification section of the same standard.

 

gallery/gloria sports 2
gallery/kayseri 2
gallery/t101-2 montaj örneği 200x133

Advantages of the Product

 

- High Acoustic Performance
  The material offers high acoustic performance with a sound insulation index 

  (DLR) value of at least 29 dB in the highest insulation class.


- Ease of Maintenance
  The material provides UV resistance and does not require any film coating. It is not

  necessary to turn the entire module around with rubber seals. Thus, you are not faced

  with both aesthetic and structural problems like film throws and gasket wear.

  Therefore, there is no need for maintenance operations related to them.

 

- High Transparency
  The Material offers at least 90% transparency value during delivery. At the end of 10

  years 88% and at the end of 30 years 86% transparency is guaranteed. A similar

  material which is used for transparent noise barriers is polycarbonate. This material

  offers only 82% transparency during delivery.


- High Resistance to UV Rays

  The material offers high resistance to UV rays without any additional process such as

  UV film coating on the polycarbonate material. This feature will protect the

  transparency of the barrier system throughout its lifetime.


- Worldwide Usage and Compilance to Noise Barrier Standards
  The material is widely used all over the world and is suited to all the noise barrier

  standards.

gallery/akustik performans
gallery/bakım kolaylığı
gallery/şeffaflık
gallery/uv dayanımı
gallery/standartlara uygun

Plain or Modular Barriers T 201 and T 202

 

The Sheets are made of polymethylmethacrylate (PMMA) and are available in plain (T 101) or modular (T 102) form. It contains polyamide yarn inside and is specially constructed for bridges and viaducts. 

 

Panels are 2000 mm wide and 12-15-20-25 mm thick and can be produced in any desired length. They are applied in different shapes according to the carrier pole type.

 

Panels have 29 dB, 30 dB, 32 dB and 33 dB sound insulation index (DLR) values according to TS EN 1793-2 test results which are made in international accredited acoustical laboratories and at the same time according to the Turkish standard. This value falls within the class B3, which is the highest class according to Annex A classification section of the same standard.

Advantages of the Product

 

- Special design for bridge and viaducts and polyamide yarn system to prevent

  falling of broken parts

  The included polyamide yarn prevents the falling of broken parts without additional

  measures. It provides a practical solution in situations where you do not want the

  broken parts fall down, like bridges and viaducts.

 

- High Acoustic Performance
  The material offers high acoustic performance with a sound insulation index (DLR)

  value of at least 29 dB in the highest insulation class.


- Ease of Maintenance
  Malzeme, UV dayanımı sunarken herhangi bir film kaplanmasına ihtiyaç

  duymadığından tüm çevresinin de lastik contalarla çevrilmesi gerekmemektedir.

  Örneğin, malzemenin üstteki kenarı herhangi bir contayla çevrilmemektedir.

  Böylece film atmaları ve conta yıpranmaları gibi hem estetik hem de yapısal

  sorunlarla karşılaşılmamakta, bunlarla ilgili bakım işlemlerine de gerek

  duyulmamaktadır.


- High Transparency
  The Material offers at least 90% transparency value during delivery. At the end of 10

  years 88% and at the end of 30 years 86% transparency is guaranteed. A similar

  material which is used for transparent noise barriers is polycarbonate. This material

  offers only 82% transparency during delivery.


- High Resistance to UV Rays

  The material offers high resistance to UV rays without any additional process such as

  UV film coating on the polycarbonate material. This feature will protect the

  transparency of the barrier system throughout its lifetime.


- Worldwide Usage and Compilance to Noise Barrier Standards
  The material is widely used all over the world and is suited to all the noise barrier

  standards.

gallery/evonik 3
gallery/akustik performans
gallery/bakım kolaylığı
gallery/şeffaflık
gallery/uv dayanımı
gallery/standartlara uygun
gallery/viyadüklere özel
gallery/viyadüklere özel200x133
gallery/t101-2 200x133
gallery/t201 200x133
gallery/t201 montaj 200x133
gallery/t-serisi

While noise barriers are being installed to reduce noise on receivers, transparent noise barriers are preferred in many cases in order to ensure that the field of view is not restricted at the receiver and the source, so that the natural surroundings can also be seen, for example in traffic.

 

Transparent acrylic sheets are very advantageous with high light transmittance, non-yellowing surface, many different color options, resistance to crushing and easy formability. It is a noise barrier material applied in many parts of the world.

 

fidesgrup, is the representative distributor of the worlds leader in transparent noise barriers, PLEXIGLAS® Soundstop. 

Stone Impact Test of PLEXIGLAS® Soundstop with Polyamide

Transparent Noise Barriers T-Series